Structure Of Annealing Furnace

The skeleton of the annealing furnace is welded by various types of steel, the outer frame is used as the main beam with channel steel, and the plate is used for cold plate and trolley.

The main beam is the channel steel, the bottom plate and the front end plate are used in the middle plate.

The transmission part of the annealing furnace: the car drive adopts the motor, the deceleration and electromechanical heating phosphating saponification production line to drive a group of active wheel drive through the chain. The transmission of the furnace door is a combination of electric motor and motor with a worm gear reducer and a motor.

Seal: a labyrinth structure is adopted for the seal of the trolley and the furnace body, and the manufacturer of the annealing furnace on both sides of the trolley has an automatic sand sealing device. The door seal adopts the raceway pressure and the spring pressure automatic mechanism to seal the furnace body part with the high quality refractory brick structure, so as to ensure the furnace chamber sealing. High aluminum brick masonry is used in the pressure resistance part of the trolley, and insulation bricks are added in the lower part.

The annealing furnace combustion system in furnace are respectively arranged at both sides of only a few burning in the furnace, heat flow reciprocating cycle, ensure the temperature uniformity. Automatic and semi-automatic type can be selected according to the needs.

Hangzhou Hangshen Energy-Saving Furnace Co.,Ltd.

Add: Yanshan Industrial Zone, Chongxian Street, Yuhang, Hangzhou, Zhengjiang

Sales manager: Mr.Qian

Tel: 0086-571-86172088

Fax: 0086-571-86173266

Mobile phone: 15990123123

QQ: 389489295