The bright annealing furnace is a medium industrial furnace with a long strip shape. The continuous bright annealing furnace of the vehicle factory forging workshop used fuel sub-high speed burner, which was mainly used for heat treatment after heating and casting of the train axle. It is one of the primary equipments of the vehicle factory forging and smelting workshop.
improvement measures
The temperature of the modified bright annealing furnace is divided into three zones. During this time, the workpiece is pushed into the furnace zone by the pusher. The heating zone has four burners arranged on the two sides of the wall. The track is made of refractory bricks. The arch supports, so that the workpiece can be heated on both sides, and then the two zones and three zones are in the constant temperature zone, and four burners are arranged in the same height and height on both walls. Eight burners are equipped with low-pressure vortex burners. There are spacer beams between the first and second zones. There are two composite metal heat exchangers on the front and back of the furnace. Both sides of the furnace wall, the bottom of the furnace are made of brick structure, the top of the furnace is made of refractory fiber felt, and a high-pressure fan is used together to supply the combustion air and the ejector wind for exhausting smoke. In the gas main pipe, the air main pipe is provided with a regulating valve and a flow orifice plate, and a regulating valve is also arranged on the leading air main pipe, and a set of leading microcomputer control system is provided together to display the instrument and the protection device.
CONTACT US!
Hangzhou Hangshen Energy-Saving Furnace Co.,Ltd.
Sales manager: Mr.Qian
Tel: 0086-571-86172088
Fax: 0086-571-86173266
Mobile phone: 15990123123
QQ: 389489295
Website:www.cnsuntech.com
Email: hsdl088@126.com
