We take products as the core, market-oriented and standardized operation of the service platform as the carrier, to promote our Cantilever Type Annealing Furnace, Well Type Spheroidizing Annealing Furnace, Well Furnace to the global market. Our company not only has advanced manufacturing equipment, manufacturing technology and process, but also has the ability to quickly respond to market changes. We are willing to establish and carry out business with customers and friends on friendly, equal and mutual-benefit base. We hope our intelligence, efforts and sound credit will result in first-ranking service to all customers. We have gradually become the loyal partner of many well-known enterprises at home and abroad.
| Technical Parameter | ||||
| Model | Studio Size | Rated Power (KW) | Rated Temperature(℃) | Loading Capacity(Ton) |
| RZG-45-6 | Ф900*1000 | 45 | 950 | 0.5 |
| RZG-65-6 | Ф800*1800 | 65 | 950 | 1.5-2 |
| RZG-150-9 | Ф1300*1800 | 150 | 950 | 2-3 |
| RZG-180-9 | Ф1600*2000 | 180 | 950 | 3-5 |
| RZG-220-9 | Ф1500*2800 | 220 | 950 | 6-8 |
| RZG-260-9 | Ф1600*3200 | 260 | 950 | 8-10 |
Note: The above parameters are for reference only, and the size of the furnace varies according to the diameter and height of the wire disk by the customer.
Uses: This Heat Treating Equipment for Fasteners is mainly used for annealing and tempering of fasteners and standard parts.
Brief introduction to structure of well type wire annealing furnace:
1. Furnace body of well type aluminum wire annealing furnace: it is welded into cylindrical shell by angle steel, channel steel and steel plate.
2. Furnace lining: the energy-saving ceramic fiber blanket is used as the heat insulation material of the furnace. When making, the special equipment is used to make the furnace into folded blocks according to the size of the furnace, so as to achieve good heat storage effect.
3. Heating element: resistance belt is adopted, 0cr25al5 is processed into waveform structure by special mold, and hung on the fixed parts (ceramic screw) around the furnace wall in groups, which is very convenient for installation and maintenance and has long service life.
4. Hot air circulation: there is a fan on the top of the heat treating equipment for fasteners to mix the air in the furnace during the heating process, so as to make the temperature in the furnace as uniform as possible under the action of the return air duct.
5. Furnace cover lifting: manual lever or electric lifting can be used for furnace cover lifting to move up, down, left and right.
6. Control system: the control mode of heat treating equipment for fasteners is program-controlled PID automatic adjustment, and the zero crossing trigger circuit is used for temperature adjustment. The intelligent digital display temperature controller can set, modify, control the temperature, and alarm the over temperature.
Our company has complete production and testing equipment to ensure strict quality management. Our product quality is in a high position in the industry of Automatic Induction Heater Heating Treatment Equipment for Bolts and Nuts. Based on domestic and worldwide-oriented, our company has gained good reputation in the market with our gist that quality is the most important. With the goal of 'zero defect'.
Hot Tags: heat treating equipment for fasteners, China, manufacturers, suppliers, factory, company, wholesale, buy, cheap, products, Electric Heating Annealing Furnace, Regenerative furnaces, Trolley Furnace, Controlled Protective Atmosphere Annealing Furnace, Aluminum Annealing Furnace, Arm-Type Vacuum Annealing Furnace
