We will state with absolute certainty that for Controlled Protective Atmosphere Annealing Furnace, Pit Type Annealing Furnace, Heat Treatment Equipment. We win the market together with our customers and partners in the fierce international market competition by cooperating and sharing. We are convinced that our professionalism, high quality, competitive price and personalized customized service will win your support and trust.
| Technical Parameter | ||||
| Model | Studio Size | Rated Power (KW) | Rated Temperature(℃) | Loading Capacity(Ton) |
| RZG-45-6 | Ф900*1000 | 45 | 950 | 0.5 |
| RZG-65-6 | Ф800*1800 | 65 | 950 | 1.5-2 |
| RZG-150-9 | Ф1300*1800 | 150 | 950 | 2-3 |
| RZG-180-9 | Ф1600*2000 | 180 | 950 | 3-5 |
| RZG-220-9 | Ф1500*2800 | 220 | 950 | 6-8 |
| RZG-260-9 | Ф1600*3200 | 260 | 950 | 8-10 |
Note: The above parameters are for reference only, and the size of the furnace varies according to the diameter and height of the wire disk by the customer.
Uses: This Heat Treating Equipment for Fasteners is mainly used for annealing and tempering of fasteners and standard parts.
Brief introduction to structure of well type wire annealing furnace:
1. Furnace body of well type aluminum wire annealing furnace: it is welded into cylindrical shell by angle steel, channel steel and steel plate.
2. Furnace lining: the energy-saving ceramic fiber blanket is used as the heat insulation material of the furnace. When making, the special equipment is used to make the furnace into folded blocks according to the size of the furnace, so as to achieve good heat storage effect.
3. Heating element: resistance belt is adopted, 0cr25al5 is processed into waveform structure by special mold, and hung on the fixed parts (ceramic screw) around the furnace wall in groups, which is very convenient for installation and maintenance and has long service life.
4. Hot air circulation: there is a fan on the top of the heat treating equipment for fasteners to mix the air in the furnace during the heating process, so as to make the temperature in the furnace as uniform as possible under the action of the return air duct.
5. Furnace cover lifting: manual lever or electric lifting can be used for furnace cover lifting to move up, down, left and right.
6. Control system: the control mode of heat treating equipment for fasteners is program-controlled PID automatic adjustment, and the zero crossing trigger circuit is used for temperature adjustment. The intelligent digital display temperature controller can set, modify, control the temperature, and alarm the over temperature.
Since its inception, our company has been committed to providing high quality KIA-1kw Series Mini-Inductor Portable Type Heater and value-added services to our customers. In order to achieve sustainable development, one of the basic requirements is to follow the principle of customer supremacy, pay attention to customer needs, improve service capacity and level, and create customer value in all aspects. Our company is devoted to provide products to friends both old and new both at home and abroad with superior quality, competitive price, rapid supply method and thoughtful service. We welcome your visit, contact and negotiation. We will become your best partner for business!
Hot Tags: heat treating equipment for fasteners, China, manufacturers, suppliers, factory, company, wholesale, buy, cheap, products, Wire Annealing Furnace, Annealing Furnace For Wire, Cover type annealing furnace, Energy Efficient Furnace, annealer, Innovative Heat Treatment Furnaces For Metals
