Fast delivery Carboxy Methyl Cellulose for Dehydrogenation Furnace, Car Bottom Annealing Furnace, Controlled Protective Atmosphere Annealing Furnace. We continue to pursue the improvement of the company's operating results, hoping to bring long-term good returns to shareholders. We focus on system optimization to promote collaborative innovation in the industrial chain.
| Technical Parameter | ||||
| Model | Studio Size | Rated Power (KW) | Rated Temperature(℃) | Loading Capacity(Ton) |
| RZG-45-6 | Ф900*1000 | 45 | 950 | 0.5 |
| RZG-65-6 | Ф800*1800 | 65 | 950 | 1.5-2 |
| RZG-150-9 | Ф1300*1800 | 150 | 950 | 2-3 |
| RZG-180-9 | Ф1600*2000 | 180 | 950 | 3-5 |
| RZG-220-9 | Ф1500*2800 | 220 | 950 | 6-8 |
| RZG-260-9 | Ф1600*3200 | 260 | 950 | 8-10 |
Note: The above parameters are for reference only, and the size of the furnace varies according to the diameter and height of the wire disk by the customer.
Uses: This Heat Treating Equipment for Fasteners is mainly used for annealing and tempering of fasteners and standard parts.
Brief introduction to structure of well type wire annealing furnace:
1. Furnace body of well type aluminum wire annealing furnace: it is welded into cylindrical shell by angle steel, channel steel and steel plate.
2. Furnace lining: the energy-saving ceramic fiber blanket is used as the heat insulation material of the furnace. When making, the special equipment is used to make the furnace into folded blocks according to the size of the furnace, so as to achieve good heat storage effect.
3. Heating element: resistance belt is adopted, 0cr25al5 is processed into waveform structure by special mold, and hung on the fixed parts (ceramic screw) around the furnace wall in groups, which is very convenient for installation and maintenance and has long service life.
4. Hot air circulation: there is a fan on the top of the heat treating equipment for fasteners to mix the air in the furnace during the heating process, so as to make the temperature in the furnace as uniform as possible under the action of the return air duct.
5. Furnace cover lifting: manual lever or electric lifting can be used for furnace cover lifting to move up, down, left and right.
6. Control system: the control mode of heat treating equipment for fasteners is program-controlled PID automatic adjustment, and the zero crossing trigger circuit is used for temperature adjustment. The intelligent digital display temperature controller can set, modify, control the temperature, and alarm the over temperature.
With dependable high quality approach, great reputation and excellent customer support, the series of products and solutions produced by our firm are exported to lots of countries and regions for Portable Mini Induction Heating Equipment. We achieve innovation and improve the quality of products and services by responding to the challenges we are currently facing. We always adhere to the principle of 'integrity and innovation', with good business ethics and modern management methods.
Hot Tags: heat treating equipment for fasteners, China, manufacturers, suppliers, factory, company, wholesale, buy, cheap, products, Bell Type Annealing For Strip, Annealing Furnace Heat Treatment, Trolley Type Annealing Furnace, Innovative Heat Treatment Furnaces For Metals, Box Type Heat Treatment Furnace, Large Container Annealing Furnace
