We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for STC Furnace, Regenerative furnaces, Trolley Type Annealing Furnace. Our company has increased investment in product research and development , and gradually established an enterprise lead research and development system with effective combination of market competition. We insist on making our products fine and meticulous, which enhances the safe use of our products and prolongs the service life of our products.
| Technical Parameter | ||||
| Model | Studio Size | Rated Power (KW) | Rated Temperature(℃) | Loading Capacity(Ton) |
| RZG-45-6 | Ф900*1000 | 45 | 950 | 0.5 |
| RZG-65-6 | Ф800*1800 | 65 | 950 | 1.5-2 |
| RZG-150-9 | Ф1300*1800 | 150 | 950 | 2-3 |
| RZG-180-9 | Ф1600*2000 | 180 | 950 | 3-5 |
| RZG-220-9 | Ф1500*2800 | 220 | 950 | 6-8 |
| RZG-260-9 | Ф1600*3200 | 260 | 950 | 8-10 |
Note: The above parameters are for reference only, and the size of the furnace varies according to the diameter and height of the wire disk by the customer.
Uses: This Heat Treating Equipment for Fasteners is mainly used for annealing and tempering of fasteners and standard parts.
Brief introduction to structure of well type wire annealing furnace:
1. Furnace body of well type aluminum wire annealing furnace: it is welded into cylindrical shell by angle steel, channel steel and steel plate.
2. Furnace lining: the energy-saving ceramic fiber blanket is used as the heat insulation material of the furnace. When making, the special equipment is used to make the furnace into folded blocks according to the size of the furnace, so as to achieve good heat storage effect.
3. Heating element: resistance belt is adopted, 0cr25al5 is processed into waveform structure by special mold, and hung on the fixed parts (ceramic screw) around the furnace wall in groups, which is very convenient for installation and maintenance and has long service life.
4. Hot air circulation: there is a fan on the top of the heat treating equipment for fasteners to mix the air in the furnace during the heating process, so as to make the temperature in the furnace as uniform as possible under the action of the return air duct.
5. Furnace cover lifting: manual lever or electric lifting can be used for furnace cover lifting to move up, down, left and right.
6. Control system: the control mode of heat treating equipment for fasteners is program-controlled PID automatic adjustment, and the zero crossing trigger circuit is used for temperature adjustment. The intelligent digital display temperature controller can set, modify, control the temperature, and alarm the over temperature.
As one of the best suppliers of Portable Type Mini-Inductior Induction Heater Induction Heating Equipment, we have a significant market share and we are proud to be ahead of the pack in the industry. Our company's technical support and research and development capabilities in the same industry is first-class. Scientific management, perfect sales and after-sales service system are the solid foundation for our continuous development.
Hot Tags: heat treating equipment for fasteners, China, manufacturers, suppliers, factory, company, wholesale, buy, cheap, products, Bell Type Spheroidizing Annealing Furnace, Aluminum Furnace, Car Bottom Annealing Furnace, Well type hydrogen removal furnace, Methanol Decomposition Furnace, Large Industrial Furnace
