Our company aim to provide world wide brand of made-in-China Multifunctional Annealing Furnace, Electric Phosphating And Saponification Furnace, Strong Convection Furnace. We wil comprehensively enhance the comprehensive competitiveness of our company, and realize the benign leaping development of the enterprise. Continuous product improvement in terms of quality and technology is the only way we can compete aggressively in the marketplace. We use the model of "Technology + Internet + Culture + Service" to drive development.
| Technical Parameter | ||||
| Model | Studio Size | Rated Power (KW) | Rated Temperature(℃) | Loading Capacity(Ton) |
| RZG-45-6 | Ф900*1000 | 45 | 950 | 0.5 |
| RZG-65-6 | Ф800*1800 | 65 | 950 | 1.5-2 |
| RZG-150-9 | Ф1300*1800 | 150 | 950 | 2-3 |
| RZG-180-9 | Ф1600*2000 | 180 | 950 | 3-5 |
| RZG-220-9 | Ф1500*2800 | 220 | 950 | 6-8 |
| RZG-260-9 | Ф1600*3200 | 260 | 950 | 8-10 |
Note: The above parameters are for reference only, and the size of the furnace varies according to the diameter and height of the wire disk by the customer.
Uses: This Heat Treating Equipment for Fasteners is mainly used for annealing and tempering of fasteners and standard parts.
Brief introduction to structure of well type wire annealing furnace:
1. Furnace body of well type aluminum wire annealing furnace: it is welded into cylindrical shell by angle steel, channel steel and steel plate.
2. Furnace lining: the energy-saving ceramic fiber blanket is used as the heat insulation material of the furnace. When making, the special equipment is used to make the furnace into folded blocks according to the size of the furnace, so as to achieve good heat storage effect.
3. Heating element: resistance belt is adopted, 0cr25al5 is processed into waveform structure by special mold, and hung on the fixed parts (ceramic screw) around the furnace wall in groups, which is very convenient for installation and maintenance and has long service life.
4. Hot air circulation: there is a fan on the top of the heat treating equipment for fasteners to mix the air in the furnace during the heating process, so as to make the temperature in the furnace as uniform as possible under the action of the return air duct.
5. Furnace cover lifting: manual lever or electric lifting can be used for furnace cover lifting to move up, down, left and right.
6. Control system: the control mode of heat treating equipment for fasteners is program-controlled PID automatic adjustment, and the zero crossing trigger circuit is used for temperature adjustment. The intelligent digital display temperature controller can set, modify, control the temperature, and alarm the over temperature.
We adopt a high-efficiency manufacturing system to continuously improve the quality of Sell Well New Type Induction Heater Portable Fifteen Years of Production Experience, update design concepts, and improve service systems. We make product technology closer to consumers from product development. Through the value chain management process with brand development as the main line, we should fully meet the needs of consumers and keep pace with the market trend.
Hot Tags: heat treating equipment for fasteners, China, manufacturers, suppliers, factory, company, wholesale, buy, cheap, products, Annealing Furnace Steel, Bell Type Spheroidizing Annealing Furnace, Aluminum Furnace, Valve Cast Steel Annealing Furnace, Pit Furnace, Electric Furnace
